#Rinnai energysaver es38w driver#
#Rinnai energysaver es38w free#

A should be maintained from any snow accumulation. The appliance will not function properly if the intake air or exhaust is impeded by obstructions.

#Rinnai energysaver es38w free#

Keep the area around flue terminal free of snow and ice. They cause fading of the paint and deformation of the resin. Wring water out well and wipe the unit.ĭo not use volatile substances such as benzene or thinners. Keep fan and motor free of dust and dirt by cleaning annually.ĭampen soft cloth with warm water. Motors are permanently lubricated and do not need periodic lubrication. The flue should be inspected annually for blockages or damage. Use pressurized air to remove dust from the main burner, heat exchanger, and fan blades.ĭo not use wet cloth or spray cleaners on the burner. Remove the front panel by removing two screws.ģ. Prevent dust from accumulating on the power cord, side covers, and parts behind the appliance.Īny screen or guard removed for servicing the appliance must be replaced prior to operating the appliance. It is imperative that control compartments, burners, and circulating air passage ways of the appliance be kept clean. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. The appliance should be inspected annually by a qualified service technician. The horizontal louver (which determines the vertical air flow direction) is fixed and cannot be adjusted.Īll maintenance and service are to be performed by a qualified service technician, preferably one who has attended Rinnai service training classes on the Direct Vent products.

#Rinnai energysaver es38w driver#

Use a screw driver or similar object to bend each louver to the desired position.ĭo not bend repeatedly (no more than 5 times) or else the louver will break. The vertical louvers may be adjusted to move the air flow more to the right or to the left. Turn the heater off before cleaning the filter.ĭo not adjust the air flow louvers while warm air is flowing. The sensible temperature control feature allows comfortable heating which matches the conditions in the room.īased on the information collected by the room temperature thermistor when the heating starts, the heating capacity is automatically adjusted to achieve a comfortable heating effect and to reach the temperature setting quickly.ĭust is present, clean the filter. The efficiency rating of this appliance is a product thermal efficiency rating determined under continuous operating conditions and was determined independently of any installed system. Therefore, specifications are subject to change without prior notice. Rinnai is continually updating and improving products. The flue must be terminated to atmosphere with only flue components listed LPG) when provision is made for the simple conversion from one gas to theįor installation at altitudes up to 10,200 feet (3109 m).įorced combustion, forced convection, flued gas furnace

Limited Warranty.įor manufactured home (USA only) or mobile home or residential installationĬonvertible for use with natural gas and liquefied petroleum gases (propane / įlue Manifold Installation.Įxtension Kit Installation. Īttach Wall Brackets.Īttach Back Spacers. Ĭlearances to Combustibles.įlue Terminal Clearances.